General
The new "Generation 3" of T-Motor's Carbon Fibre Propellers. The NS-Series was entirely new developed and comes with a new design and ultra-light composition. It can reach an efficiency increase of up to 7% and increased max thrust of up to 6% compared tot the Polish-Series. The max flight time can be extended by up to 10%!
Additional Information
| Manufacturer: |  |
| SKU: | TMOMNS123 |
| GTIN: | 6971360353089 |
Specifications
- Model NO.: 26 x 8.5
- Weight (Single Blade): 48g
- Diameter: 26 inch (660.9mm)
- Pitch: 8.5 inch (215.9mm)
- Recommended Thrust / RPM: 4 ~ 8kg / 2850 ~ 3970 RPM
- Ambient Temperature: -40°C ~ 65°C
- T-MOTOR Series: 2blades integrated
- Package Weight: 625.2g
- Package Size: 717 x 105 x 75mm
- Material: CF + Epoxy
- Recommended Max. Thrust / RPM: 16kg / 5480 RPM
- Storage Temperature / Humidity: -10°C ~ 50°C / < 85%
Warning
- Prop marked with "L" is for CW which "R" for CCW (aerial view)
- Please be careful when using the propellers as the spinning propellers may cause serious injury.
- The structural strength of the propellers are fully tested. Please make sure the propellers are not used beyond the limits. Please do not tempt to test the strength of the propellers by bending them by hands. Any damage or loss from improper use will be on the users' account.
- Please make sure all the accessories are mounted properly.
- Please check on the propellers before flight and make sure they are in good conditions. Please replace propellers with new ones if fault is found with them.
- For storage, please keep them away from hostile environment including but not limited to that of H₂O, SO₂, NO₂, Cl₂, organosilicon, cyanogroup and phenol. Ambient temperature is recommended between 0 and 40°C at less than 80% humidity,
- Please apply anaerobic screw locking glue of medium or above strength when install propellers onto motors.
- Please use the propellers in compliance with local laws and regulations.
0
