Hex/ProfiCNC - Mini Carrier Board for The Cube (Pixhawk 2.1)

65,21 €
including 16% VAT. , plus shipping
  • Sucessor of Cube Black
  • New ADS-B IN Carrier Board
  • Greatly increased performance with 4x more RAM
  • 3 redundant IMUs integrated
Short supply

Shipping time: 1 - 2 workdays * (valid for GER)

Order within the next 1 hours and 47 minutes and you will receive your order between 7.12. and 8.12.

Hex/ProfiCNC - Mini Carrier Board for The Cube (Pixhawk 2.1)

General

The Mini Carrier Board from Hex Technologies / ProfiCNC for particularly compact designs. With the DF17 Standard Connector all "The Cubes" can be used. Particularly space-saving in combination with The Cube Purple Mini.

Functionality

  • Dual power input (for redundant energy supply, switches to another if one source fails)
  • Power Distribution (limits the current on each connector to prevent overload)
  • Voltage Protection (over and under voltage protection)
  • Mini Carrier Board Interface ModelPorts
  • Corresponding Connecter Model

Ports

Corresponding Connecter Model

GPS1

JST-GH 1.25 mm (8-pin)

GPS2

JST-GH 1.25 mm (6-pin)

TELEM1

JST-GH 1.25 mm (6-pin)

TELEM2

JST-GH 1.25 mm (6-pin)

I2C

JST-GH 1.25 mm (4-pin)

CAN2

JST-GH 1.25 mm (4-pin)

POWER1

Molex CLIK-Mate 2 mm (6-pin)

POWER2

Molex CLIK-Mate 2 mm (6-pin)

BUZZER

DF13 1.25 mm (2-pin)

In the Box

  • Mini Carrier Board für The Cube

"The Cube" flight controller in the photo is not included.

Additional Information

Manufacturer:
Item number: 111

0

Write your first review and help others with their purchase decision: