Hex/ProfiCNC - HereLink HD Video Transmission System V1.1

CubePilot - HereLink HD Video Transmission System V1.1

The Herelink HD Transmission System consists of a Herelink Controller and a specifically designed Herelink Air Unit, which are connected via a 2.4GHz network. The system not only allows for controlling an UAV but also transmits video from up to two cameras connected via mini HDMI.

Through the Herelink Controller, not only can the UAV be controlled, but live video can also be received with an extremely low latency of just 110ms. Additionally, the Herelink Controller provides the complete QGroundControl functionality, as well as real-time telemetry data. Thanks to the inductive touchscreen, all functions can be easily operated.
The Herelink HD set is supported by both Ardupilot and the PX4 Flight Stack.

Furthermore, the Herelink has a low power consumption of less than 4W with a battery capacity of 4950mAh. As a result, the extensive functionality can be used for several hours without the need for recharging.

Improvements over Version 1

• Screen brightness has been improved to up to 1,000 cd/m².
• Ethernet port on the Herelink Air Unit
• SD card slot on the Herelink Air Unit
• Support for network protocols for device access

Scope of Delivery

HX4-06211 Herelink Controller Unit

• 1 x Herelink Controller Unit
• 2 x Herelink Controller Joysticks
• 1 x Herelink Omnidirectional Antenna
• 1 x Herelink Directional Antenna
• 1 x Herelink Setup Instruction Card

HX4-06210 Herelink Air Unit

• 1 x Herelink Air Unit
• 1 x Herelink Mounting Plate
• 1 x Herelink Screw Set
• 1 x Herelink Silicone Ring Set
• 2 x Herelink Taoglas Antennas
• 1 x Herelink Fan
• 1 x Herelink Cable Set
• 1 x Herelink HDMI Cable
• 1 x Herelink Setup Instruction Card

Smooth, Long distance Video and telemetry

Signal Transmission range up to 20KM;

With Minimum latency 110ms; Two HDMI Inputs ; Supports 720p 30fps, 1080p 30fps / 60fps video format.

Command, Control, and Video all on one secure device

Control, Data, and Video all on one simple reliable device.

Making the complex device System integrated and miniaturized.

Multifunctional unit

Certified by many countries, obtain FCC, CE, UKCA, RCM, IC, and others.

Integrates telemetry & video Transmission module, Dual HDMI in, Dual S.Bus out, Serial, and Ethernet in one small unit.

Airunit size is only 78.5*30*15mm

Sunlight readable 1000nits screen brightness

The remote Controller is embedded with a 1000 nits Peak brightness screen, improving visibility under sunlight, A good companion for Surveying, Mapping, Rescue, Industrial inspection and other uses.

Supports External Ethernet Devices

The new Ethernet port is ready on the Airunit. Support external Ethernet devices, such as network cameras, light detection, gas detection, and other Ethernet devices.

Through the LAN interface, users can Access the device without Geographic limitations.

*This product does not come with the ETH connector. If necessary, please purchase seperately from our store.

Customizable and Upgradeable

Open controller API, QGC code, able to develop your own software and system.

Both Airunit and Controller support firmware upgrades.

Temperature control

New Fan for the new Dual Video mode and other high compute intensive tasks.

Support Open Source Flight Stacks

Adapt to Ardupilot and PX4 open source Flight Control Software, can monitor Aircraft Information and edit flight in real-time through Mavlink support GCS application.

Multiple Interactions

The Airunit able to connect multiple ground stations through a variety of connection methods, and can be connected to realize collaborative work.

Accessories

• HereLink1.1 Controller x 1
• Package x 1
• Omnidirectional antenna x 1
• Joy-stick x 2
• Directional antenna x 1
• Airunit antenna x 2
• Package x 1
• HereLink1.1 Airunit x 1
• Back board x 1
• Fan x 1
• S.bus cable x 1
• Power cable x 1
• Telemetry cabe x 1
• HDMI cable x 1
• Fan Screw x 1
• O-ring x 1
• Micro USB cable x 1