Hex/ProfiCNC - Power Selection Module (Pixhawk 2.1)

72,00 €

incl. 19% VAT , plus

This is for developers making their own carrier boards.

The Power Selection Module (PSM) by Hex Technologies/ProfiCNC for Pixhawk 2.1 - "The Cube" for the own development of Carrier Boards.

Power Input must be between 4.4V and 5.7V
Output is the same voltage as the selected input
Power can be taken off the PSM in different methods, allowing for different subsystems to fail gracefully
This module also holds the Buzzer controller
The Aux power input has a Zener clamping it to 5.6v, this zener is protected from continuous over voltages by a fuse and fet.
Weight: 5g
Dimensions: 60 x 40 x 5 mm