458,00 € *
Hex/ProfiCNC - Airbot Mini Carrier Board (Set)
Dimensions
Features
- Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- Easy to install on drone (see the mounting pattern above)
- Power distribution & voltage protection (providing current to each connector)
- Motor PWM signal distribution (up to 8 motors - distributed on corners)
- Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- AUX VCC pins are connected together. This allows powering the AUX rail externally.
Interface
- PORT
- CONNECTOR ON BOARD
- CONNECTOR TO PLUG IN
- I2C_2 - CAN1 - CAN2
- JST GH : BM04B-GHS-TBT
- GHR-04V-S
- USB - TELEM1 - TELEM2 - GPS2
- JST GH : BM06B-GHS-TBT
- GHR-06V-S
- GPS1
- JST GH : BM08B-GHS-TBT
- GHR-08V-S
- POWER1 - POWER2
- Molex CLIKMATE : 502443-0670
- 502439-0600
- *All connectors are the same as Cube Standard carrier board
Pinout
Included
- 1x Hex/ProfiCNC - Airbot Mini Carrier Board (Set)
| Manufacturer: |  |
| SKU: | 211200 |
| GTIN: | 4251935108989 |
0
