Flyfire - Manti 3 Plus Parachute Replacement (Mavic 3/Mavic 3 Classic)

Flyfire - Manti 3 /3 Plus Parachute

The Manti parachute is a small parachute system. Using integrated position sensors and intelligent algorithms, it recognises critical situations and triggers a detonator that ejects the parachute. In this way, it brings the drone safely back to the ground. It is reusable and easy to pack. With a few simple steps, the parachute is attached to the drone and activated at the touch of a button.

The system has a self-sufficient power supply and releases autonomously in an emergency. Flights become safer and thus the risk in terms of damage is significantly minimised.

A horizontal sensor, a vertical dual sensor and an intelligent algorithm provide a lot of safety!
Impact and fall detection by assessing if the aircraft is malfunctioning to determine if the parachute needs to be opened.
Horizontal and vertical activation to effectively avoid propeller entanglement and ensure successful protection of the drone.

After a deployment, the parachute can be repacked and reused with a new deployment module.

Highlights

• Flyfire APS algorithm
• Integrated black box
• Fast response time
• Simple firmware upgrade
• Reusable design

Replaceable parachute

It is easier to reuse and offers a variety of safety options. The new generation Manti is equipped with a replaceable parachute that also includes the power supply. Once the aircraft has been recovered, the parachute can be quickly replaced. The standard and plus version can be used.*

For a safe and carefree flight

SMT surface mounting technology, high reliability in combining components and strong anti-vibration capability. All this ensures high flight safety.

32-bit arm processor

Omnidirectional attitude and barometer data are collected and processed in real time to determine the drone's flight state in milliseconds. The IMU and barometer combine the values. As soon as it is detected that the drone is in a dangerous situation, you can react within 0.5 seconds and give the command to open the parachute, allowing you to land without panic and in peace.

Long operating time

The 150 mA battery ensures long operating time: you can charge the drone for 30 minutes at a time (6 times the flight time), the battery power can be read instantly and there is an alarm function. ACOUSTIC ALERT New buzzer, command prompt, easier operation, continuous beep after parachute opens.

Simulated propeller stop at 25 altitude.

According to the official test, the Mavic Pro test object stopped at a height of 25 metres and fell freely to simulate the accident. The success rate of opening the parachute was 100% and the landing speed was only 5.5 m/s, effectively reducing the severe damage caused by crashes. If a 1 kg drone falls from 30 m and hits a person's head, it can cause irreversible damage. The height limit for light drones is 120 m. The height limit for smaller drones is 50 m. Buildings and public facilities are usually 25 to 40 m high. In addition, flight safety will be affected by unknown factors such as flying birds, electromagnetic interference, loss of signal, low power, etc.
*When changing from the Manti 3 parachute to the 3 Plus parachute, the Manti software version must be changed to the Phantom version.

Materials: ABS
Weight: 89.2g
Size: 5*4.5*3.7cm
Speed reduction: 5m/s, 5.5m/s
Normal working time: 4h
Response time: 100 milliseconds
Response distance: 8 meters
Working altitude: ≤4000 meters
Equivalent falling distance: 1.6 meters and below
Parachute Area: 1.1 ?

Included

• 1x Flyfire - Manti 3/3 Plus parachute