Real-time position Streaming in NMEA
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in Emlid Flow.
Reach can turn on and off automatically
Reach can turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach, for example, if the receiver is placed on the roof of a tractor.
NTRIP or another Reach as a base station
Reach RS+ needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. The base might be another Reach RS+ receiver or an NTRIP service. VRS is also supported. Reach RS+ works seamlessly with other Reach receivers over any link.
Reach RS+ is designed for harsh conditions.
Dense forests, mountains, frost, heat and water, Reach can handle it all
- IP67. Can be held 1 meter deep underwater for half an hour.
- -20 to +65 º? Working temperature. Isn’t afraid of either heat or cold.
- 30 Hours. Industrial LiFePO4 battery that doesn’t die when cold. Charges over USB from a powerbank.
- Reach RS+
- Carrying case with a strap
- Radio antenna
- Adapter for survey pole
- USB cable